Crack Detecting (Dpt) Sprays
Nondestructive testing is one of the most common methods used for testing various components for the presence of surface and internal defects before they are put into use, or even after some extended interval of use in the case of in-service components. This testing is done in order to verify the component's integrity and also as a safety precaution. Dye penetrant testing or liquid penetrant testing is one of the most common and cost effective techniques used in nondestructive testing.
Penetrant Sprays
Spray-Check™ RED - 1
Spray-Check™ RED-1 is specialty PENETRANT having a perfect blend of contents with most advanced formulation.
Spray-Check™ RED-1 as sprayed, enters in surface cracks, flaws, porosities and other discontinuities quickly.
It perform outstanding penetrating characteristics thus displays most reliable results in tracing discontinuities on ferrous and non-ferrous metals, non porous ceramics etc.. Substantial bright color of penetrant Spray-Check™ RED-1 provides maximum ease to inspect the test and conclude precise results.
Substantially low in sulphur, chlorine and halogen contents meeting national and international standards and is free from any chlorinated hydrocarbon.
Developer Sprays
Spray-Check™ WHT-1
Spray-Check™ WHT-1 is a ready to use developer spray for NDT testing of most metals, non metals & ceramics. White suspended particles in non aqueous solution lays opaque white layer when sprayed on surface under-checking. Advanced formulation allows a thin layer of white particles to be laid by spraying Spray-Check™ WHT-1. With that precise results can be obtained to locate crack or discontinuity.
Maximum reliable results are displayed by action of developer Spray-Check™ WHT-1 on penetrant Spray-Check™ RED-1 that makes defect finding very easy. Substantially low in sulphur, chlorine and halogen contents meeting national and international standards and is free from any chlorinated hydrocarbon.
Cleaner / Remover
Spray-Check™ CLR-1
Spray-Check™ CLR-1 is ready to use, colorless, fast acting excess penetrant remover and cleaner. It’s a fast drying action which cleans off the surface impurities e.g. grease, dust, paint etc..
When sprayed on the surface to be cleaned, Spray-Check™ CLR-1 with the force of spray clears off the surface impurity particles which tends to be sticky. Any residuals left on the surface will clear off with the evaporation of cleaner.
Anti Spattering Sprays
Spray-Check™ NT – SPAT
Spray-Check™ NT – SPAT is a pre weld spray that has application for prevention of welding spatters to adhere to MIG/TIG welding nozzles hence preventing clogging of nozzles and attain continuous welding.
Spray-Check™ NT – SPAT can be sprayed on job surface surrounding welding area in order to achieve a clean surface free from sticky spatters that gives presentable quality of welding job without costly labor spent in cleaning the job.